Silk'n RF-501, Руководство пользователя

Страница: 8 / 100

13 14
EN EN
3. The indicator light on the epilator lights up when
the epilator is connected to the power supply.
After a full charge of the battery (8 hours),
you can use the epilator about 30-40 minutes.
5.2 Using the epilation cap
1. Use the large epilation cap 1 if you want to epilate
large areas of skin.
2. Use the small epilation cap 9 if you want to epilate
small, delicate areas of skin such as armpits or the
intimate area.
3. Place the desired epilation cap on the epilation head 2 .
5.3 Changing the epilation head
1. Press both release buttons 3 and remove the epila-
tion head 2 at the same time.
2. Place the cleaned or new epilation head on the
epilator by pressing it on the epilator.
6. Hair removal
• Skin irritation may occur during and after the epil-
ating or shaving process. There is no need to worry.
• The best time to epilate or shave is immediately
after a shower. The skin must be completely dry
before you begin the process.
• Use a mild body lotion after treatment to reduce
skin irritation.
1. Make sure the area of skin you wish to epilate is
clean, dry and free of grease.
2. Slide the on/off switch
4
upwards. You can choose
between 2 speed levels:
• level I for sensitive areas of skin or areas where
there is little hair growth;
• level II for larger areas of skin with heavier hair
growth.
3. Hold the area of skin you wish to epilate taut with
your free hand.
4. Place the epilator at a 90°-angle to the area of skin
you wish to epilate.
5. Glide the epilator slowly against the direction of the
hair growth on the area of skin you wish to epilate.
6. Repeat the process until all unwanted body hair has
been removed.
7. Cleaning
NOTICE! Risk of damage!
Handling the epilator improperly may
result in damage.
• Do not use aggressive cleaning prod-
ucts or sharp or metallic cleaning items
such as knives, metal sponges or some-
thing similar.
• Never clean the epilator under running
water.
1. Make sure the epilator is not connected to the
power supply.
2. Remove the epilation head 2 (See chapter “5.3