10
EN
EN
6.3 Silk’n Reveal’s Fine and Coarse treatment tips
The device has two
treatment tips
, marked ‘Fine’ or ‘Coarse’. We recommend
that you start with the
Fine treatment tip
.
Use the
Fine
treatment tip
for general treatment or delicate
fi
nishing.
Use the
Coarse treatment tip
for heavy duty exfoliation.
To change treatment tips:
1. Make sure the device is not connected to an
electrical outlet.
2. Remove the current
treatment tip (#1)
from the
device by gripping and pulling it, then replace with
the other
treatment tip.
Make sure the
treatment tip
is
fi
rmly in place before use. You will hear a click so
you know it’s in place.
7. Get started!
You're on your way to fresher, smoother skin! Treating with Silk’n Reveal is easy.
Just follow these steps for each area you wish to treat. Each treatment should
take about 5 minutes.
7.1 Recommended precautions
Before you treat an area for the
fi
rst time, do a spot test on a small area
of skin and then wait 24 hours. If you have no adverse reaction, go
ahead and treat that area.
Use the low suction mode for your
fi
rst 2-3 treatments.
Stop immediately if you feel any discomfort.
1
Revit Reveal UM NA 2289A inside ED98-07 release.indd 10
1/19/2017 11:46:14
