13
EN
You may turn on the product for a few seconds for more
efficient cleaning.
4. Wipe dry all parts of the product after cleaning.
5. Replace the dust chamber cover before using the product
again.
8 Storage
All parts must be completely dry before being stored.
• Store all parts in a clean and dry place, avoiding heat and direct
sunlight.
• Attach the cover
9
to protect the grinding disc
1
/
7
/
8
for storage.
9 Troubleshooting
Some problems may be caused by minor faults that you can fix
yourself. To do so, follow the instructions in the following table.
If it is still not possible to resolve the problem, contact customer
service. Do not repair the product yourself.
Fault
Possible cause and solution
The product
does not start.
Make sure the product is properly charged (see
chapter “Charging”).
Charging does
not start.
Make sure the USB cable
11
is securely connected
to the product and the USB port of a compatible
USB power source.
10 Technical data
Model:
FTC03
Voltage:
DC 3.7 V
Power:
6 W
Battery capacity:
1,500 mAh (lithium)
Speed settings:
2 (low / high)
Rotation speed:
1,900 rpm (low speed)
2,200 rpm (high speed)
Charging time:
2–2.5 hours
