11
EN
• Always unplug the product after charging
has been completed.
• Fully charge the product before first use and when the
battery power is low.
• The remaining battery power level shows in the
display
6
(indicated by %). Recharge the product
when the battery power is low.
• The product cannot be used during charging.
1. Plug the smaller end of the USB cable
11
into the charging
port
5
of the product.
2. Plug the larger end of the USB cable into the USB port of a
compatible USB power source (e.g. USB power adapter) for
charging.
Charging starts automatically. The current battery power level
shows in the display (indicated by %).
3. When charging is done, unplug the USB cable from the
charging port and the USB power source.
6 Operation
• Before treating an area of your feet for the first time,
perform a skin sensitivity test on a spot on your foot
for maximum 3 seconds. Start your treatment only if
there is no adverse reaction.
• You can purchase new grinding discs on our website at
www.silkn.eu.
6.1 Attaching or replacing the grinding disc
The product includes 3 grinding discs
8
/
1
/
7
(Fine, Medium
and Coarse). Start with the Fine grinding disc until you are sure
there is no adverse reaction.
1. Remove the cover
9
if it is attached to the product.
2. Remove the attached grinding disc from the product.
If necessary, attach the hooks of the disc remover
10
to the
grinding disc and then pull it up to remove the grinding disc
(see step 1 in
Fig. B
).
3. Gently push the desired grinding disc onto the spindle of the
grinding head
2
(see step 2 in
Fig. B
).
You will hear a click sound when the grinding disc is securely
snapped into place.
