12
EN
6.2 Starting and ending the treatment
1. Make sure your feet are clean and completely dry.
2. Press the operation button ( )
4
once.
The product is now turned on at a low speed. The “1” icon in
the display
6
turns on.
3. Press the operation button ( ) again to increase the speed
level.
The product is now operating at a high speed. The “2” icon in
the display turns on.
4. Move the grinding head
2
over the parts of your skin you
intend to treat. In the process, apply gentle pressure and
only keep the grinding disc on a spot on your skin for 2 to
3 seconds at a time, then check the result (see
Fig. C
).
The dust created during treatment will be sucked into the dust
chamber behind the grinding head.
5. When treatment is done, press the operation button ( ) a third
time to turn the product off.
7 Cleaning
WARNING! RISK OF ELECTRIC SHOCK!
• Always unplug the product from power
before cleaning.
NOTICE! RISK OF DAMAGE!
• Do not use any aggressive cleaners, brushes
with metal bristles, or sharp or metallic
cleaning utensils such as knives, hard
scrapers, and the like.
Clean the product after each use.
1. Make sure the product is turned off and is not being charged.
2. Slide open the dust chamber cover
3
and empty the dust
collected inside the dust chamber (see
Fig. D
).
Use the cleaning brush
12
if necessary.
3. Rinse the grinding disc
1
/
7
/
8
, the dust chamber and the
body of the product under running water (see
Fig. D
).
