User Guide (Version 2.2) of the
SiRad Simple® Evaluation Kit
- 23 -
Figure 29: Phase coloring
Figure 30: No color
3.4 Understanding the Configuration Info Field
The ‘config’ field shows the configuration that was send by the WebGUI to the sensor on connect.
Those config words are further explained in the protocol description.
Figure 31: Configuration words
3.5 Camera Controls
Click on the
bar in the bottom left to show the camera controls. Here you can see and change the camera
position and rotation of the view relative to the specified axis. The camera view can be changed
using the mouse within the scene area. A left-click-drag pans the camera position. A right-click-drag
changes the camera view angle. A middle-click-drag or moving the mouse wheel changes the
zoom setting (z-coordinate) of the camera, also see Figure 32.
Camera
control
Description
CamPosX
camera position on x-axis, move left (-) or right (+)
CamPosY
camera position on z-axis, move up (+) or down (-)
CamPosZ
camera position on z-axis, move to front(-) or
back(+)
CamRotX
camera rotation on x-axis, rotate up(+) or down(-)
relative to the x-axis
CamRotY
camera rotation on y-axis, rotate to left(+) or right(-)
relative to the y-axis
Figure 32: Camera controls