11. Writing a New Frequency Plan or Device Configuration to Non-Volatile Memory (OTP)
Note:
Writing to the device non-volatile memory (OTP) is NOT the same as writing a configuration into the Si5396 using ClockBuilder
Pro on the Si5396J-A-EVB. Writing a configuration into the EVB from ClockBuilder Pro is done using Si5396 RAM space and can be
done virtually unlimited numbers of times. Writing to OTP is limited as described below.
Refer to the Si5397/96 Reference Manuals and device data sheets for information on how to write a configuration to the EVB DUT’s
non-volatile memory (OTP). The OTP can be programmed a maximum of two times only. Care must be taken to ensure the configura-
tion desired is valid when choosing to write to OTP.
UG336: Si5396 Evaluation Board User's Guide
Writing a New Frequency Plan or Device Configuration to Non-Volatile Memory (OTP)
silabs.com
| Building a more connected world.
Rev. 1.0 | 28
