Silicon Laboratories EM3585 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 25

Silicon Laboratories EM3585 Скачать руководство пользователя страница 3

EM358x

Rev 1.0

3

1. Related Documents and Conventions

1.1. Related Documents

This data sheet accompanies several documents to provide the complete description of the Ember EM358x
devices.

1.1.1. Ember EM358x Reference Manual

The Silicon Laboratories Ember EM358x Reference Manual provides the detailed description for each peripheral
on the EM358x devices.

1.1.2. ZigBee Specification

The core ZigBee specification (Document 053474) defines ZigBee's smart, cost-effective and energy-efficient
mesh network. It can be downloaded from the ZigBee website (www.zigbee.org). ZigBee Alliance membership is
required.

1.1.3. ZigBee PRO Stack Profile

The ZigBee PRO Stack Profile specification (Document 074855) is optimized for low power consumption and to
support large networks with thousands of devices. It can be downloaded from the ZigBee website (111.zigbee.org).
ZigBee Alliance membership is required.

1.1.4. ZigBee Stack Profile

The ZigBee Stack Profile specification (Document 064321) is designed to support smaller networks with hundreds
of devices in a single network. It can be downloaded from the ZigBee website (111.zigbee.org). ZigBee Alliance
membership is required.

1.1.5. EEE 802.15.4-2003

This standard defines the protocol and compatible interconnection for data communication devices using low data
rate, low power and low complexity, short-range radio frequency (RF) transmissions in a wireless personal area
network (WPAN). It can be found here:
IEEE 802.15.4-2003 (

http://standards.ieee.org/getieee802/download/802.15.4-2003.pdf

)

1.1.6. EEE 802.11g

This version provides changes and additions to support the further higher data rate extension for operation in the
2.4 GHz band. It can be found here:

http://standards.ieee.org/getieee802/download/802.11g-2003.pdf

1.1.7. ARM

®

Cortex™-M3 Reference Manual

ARM-specific features like the Nested Vector Interrupt Controller are described in the ARM

®

Cortex™-M3

reference documentation. The online reference manual can be found here:

http://infocenter.arm.com/help/topic/com.arm.doc.subset.cortexm.m3/index.html#cortexm3

«
1
2
3
4
5
...
»

Содержание EM3585


























Отзывы:

Нет отзывов