manualshive.com logo in svg

Silicon Laboratories BGM13S, Техническое описание, Страница: 68 / 123

Поделиться
Скачать
Silicon Laboratories BGM13S Скачать руководство пользователя страница 68

6.  Layout Guidelines

For optimal performance of the BGM13S, please follow the PCB layout guidelines and ground plane recommendations indicated in this
section.

6.1  Layout Guidelines

This section contains generic PCB layout and design guidelines for the BGM13S module. For optimal performance:

• Place the module at the edge of the PCB, as shown in the figures in this chapter.
• Do not place any metal (traces, components, etc.) in the antenna clearance area.
• Connect all ground pads directly to a solid ground plane.
• Place the ground vias as close to the ground pads as possible.

Figure 6.1.  BGM13S PCB Top Layer Design

The following rules are recommended for the PCB design:

• Trace to copper clearance 150um
• PTH drill size 300um
• PTH annular ring 150um

Important

:

The antenna area must align with the pads precisely. Please refer to the recommended PCB land pattern for exact dimensions.

Figure 6.2.  BGM13S PCB Middle and Bottom Layer Design

BGM13S Blue Gecko 

Bluetooth

 

®

 SiP Module Data Sheet

Layout Guidelines

silabs.com

 | Building a more connected world.

Rev. 1.0  |  68

Содержание BGM13S




























































































































Отзывы:

Нет отзывов