Silicon Graphics Virtu VN200 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 108

Silicon Graphics Virtu VN200 Скачать руководство пользователя страница 2

COPYRIGHT

© 2002-2008 SGI. All rights reserved; provided portions may be copyright in third parties, as indicated elsewhere herein. No permission is
granted to copy, distribute, or create derivative works from the contents of this electronic documentation in any manner, in whole or in part,
without the prior written permission of SGI.

LIMITED RIGHTS LEGEND

The software described in this document is “commercial computer software” provided with restricted rights (except as to included open/free
source) as specified in the FAR 52.227-19 and/or the DFAR 227.7202, or successive sections. Use beyond license provisions is a violation of
worldwide intellectual property laws, treaties and conventions.This document is provided with limited rights as defined in 52.227-14.

TRADEMARKS AND ATTRIBUTIONS

Altix, Silicon Graphics, SGI, and the SGI logo, are registered trademarks of Silicon Graphics, Inc., in the United States and/or other countries
worldwide.

ATI is a trademark of Advanced Micro Devices, Inc. InfiniBand is a registered trademark of the InfiniBand Trade Association. Intel, Itanium, and
Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. InfiniBand is a
trademark of InfiniBand Trade Association. Internet Explorer is a registered trademark of Microsoft Corporation. Java and Java Virtual Machine
are trademarks or registered trademarks of Sun Microsystems, Inc. Linux is a registered trademark of Linus Torvalds, used with permission by
SGI. Mellanox is a registered trademark of Mellanox Technologies, Inc. in the United States and/or other countries. NVIDIA, the NVIDIA logo,
Quadro, and TwinView are registered trademarks or trademarks of NVIDIA Corporation in the United States and/or other countries. Phoenix
and PhoenixBIOS are registered trademarks of Phoenix Technologies Ltd. Red Hat and all Red Hat-based trademarks are trademarks or
registered trademarks of Red Hat, Inc. in the United States and other countries. ScaliManage is a trademark of Scali Inc. Supermicro and Supero
Doctor III are registered trademarks or trademarks of Super Micro Computer, Inc. SUSE LINUX and the SUSE logo are registered trademarks of
Novell, Inc. UNIX is a registered trademark in the United States and other countries, licensed exclusively through X/Open Company, Ltd.
Windows is a registered trademark of Microsoft Corporation.

All other trademarks mentioned herein are the property of their respective owners.

«
1
2
3
4
...
»

Содержание Virtu VN200













































































































Отзывы:

Нет отзывов