Silicon Graphics Reality Center, Руководство по установке

Страница: 114 / 117

Service Mode
11-11 R5976280 RC3300W 19072001
8
RED
MIDLIGHTS
8
BLUE
MIDLIGHTS
menu 1
menu 2 menu 3
GAMMA CORRECTIONS
BLUE GAMMA CORRECTION
Adjust slope with é or ê
Breakpoint with ç or è
R & B MIDLIGHTS
Adjust red with é or ê
blue with ç or è
FACTORY PRESET
Select with é or ê
then <ENTER>;
<EXIT> TO RETURN.
GAMMA CORRECTIONS
BLUE GAMMA CORRECTION
Adjust slope with é or ê
Breakpoint with ç or è
R & B MIDLIGHTS
Adjust red with é or ê
blue with ç or è
FACTORY PRESET
Select with é or ê
then <ENTER>;
<EXIT> to return.
menu 1
Red and Blue Midlights Correction
1 Push the cursor keys é or ê to highlight the item R & B MIDLIGHTS in the menu (menu 1).
2 Press ENTER .
If EXIT is pressed, the projector will return to the Service menu.
After ENTER is pressed, a text box with the message "Adjust with arrow key", will be displayed on the screen.
3 Push the cursor keys é or ê to adjust the Red Midlights, a text box with a bar scale (0-16) will be displayed to visualize the magnitude
of the correction (menu 2).
4 Push the cursor keys è or ç to adjust the Blue Midlights, a text box with a bar scale (0-16) will be displayed to visualize the
magnitude of the correction (menu 3).
5 Press ENTER to return to the "Gamma Corrections" menu.
Back to the factory preset values
1 Push the cursor keys é or ê to highlight the item FACTORY PRESET in the menu (menu 1)
2 Press ENTER .
3 Press EXIT to return to the Service menu.
CRT run in cycle
What can be done ?
Only necessary when a new picture tube is installed.
The CRT run in cycle option can only be activated when memory blocks on an internal # pattern are available. When one or more
such blocks are available, a flashing white image (5 sec on, 5 sec off) is generated and that for 5 min on the first internal block. In
the next 5 min, a second internal block will be used to generate the flashing white image. The image will also be shifted in a vertical
way to prevent a CRT burn in. To quit the CRT run in cycle option, press EXIT.