Silicon Graphics Rackable C2112-4G3, Руководство пользователя

Страница: 69 / 104

Chassis Service Information
007-5759-001 45
Chassis Service Information
The following sections cover the steps required to remove or install components and perform
maintenance on the C2112-4G3 chassis. For component installation, follow the steps in the order
given to eliminate the most common problems encountered. If some steps are unnecessary, skip
ahead to the step that follows.
Important: Always disconnect the AC power cord(s) before adding, changing or installing any
internal hardware components.
Tools Required : The only tool you will need to install components and perform maintenance is
a Phillips screwdriver.
Static-Sensitive Devices
Electrostatic discharge (ESD) can damage electronic components. To prevent damage to any
printed circuit boards (PCBs), it is important to handle them very carefully. The following
measures are generally sufficient to protect your equipment from ESD damage.
Precautions
• Use a grounded wrist strap designed to prevent static discharge.
• Touch a grounded metal object before removing any board from its antistatic bag.
• Handle a board by its edges only; do not touch its components, peripheral chips, memory
modules or gold contacts.
• When handling chips or modules, avoid touching their pins.
• Put the serverboards, add-on cards and peripherals back into their antistatic bags when not in
use.
• For grounding purposes, make sure your computer chassis provides excellent conductivity
between the power supply, the case, the mounting fasteners and the serverboards.