manualshive.com logo in svg

Silicon Graphics Rackable C2112-4G3, Руководство пользователя


Поделиться
Скачать
background image

COPYRIGHT

© 2011 SGI. All rights reserved; provided portions may be copyright in third parties, as indicated elsewhere herein. No permission is granted to copy, distribute, 
or create derivative works from the contents of this electronic documentation in any manner, in whole or in part, without the prior written permission of SGI.

LIMITED RIGHTS LEGEND

The software described in this document is “commercial computer software” provided with restricted rights (except as to included open/free source) as specified 
in the FAR 52.227-19 and/or the DFAR 227.7202, or successive sections. Use beyond license provisions is a violation of worldwide intellectual property laws, 
treaties and conventions. This document is provided with limited rights as defined in 52.227-14.

The electronic (software) version of this document was developed at private expense; if acquired under an agreement with the USA government or any 
contractor thereto, it is acquired as “commercial computer software” subject to the provisions of its applicable license agreement, as specified in (a) 48 CFR 
12.212 of the FAR; or, if acquired for Department of Defense units, (b) 48 CFR 227-7202 of the DoD FAR Supplement; or sections succeeding thereto. 
Contractor/manufacturer is SGI, 46600 Landing Parkway, Fremont, CA 94538.

TRADEMARKS AND ATTRIBUTIONS

SGI, and the SGI logo are registered trademarks and Rackable is a trademark of Silicon Graphics International in the United States and/or other countries 
worldwide.

AMD is a registered trademark and Opteron is a trademark of Advanced Micro Devices, Inc. 
AMIBIOS is a registered trademark of American Megatrends Inc. (AMI) in the United States and other countries.
HyperTransport is a licensed trademark of the HyperTransport Technology Consortium.
InfiniBand is a registered trademark of the InfiniBand Trade Association. 
Intel, Itanium, and Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. 
Internet Explorer and MS-DOS are registered trademarks of Microsoft Corporation. 
Java and Java Virtual Machine are trademarks or registered trademarks of Sun Microsystems, Inc. 
Linux is a registered trademark of Linus Torvalds, used with permission by SGI. 
Novell and Novell Netware are registered trademarks of Novell Inc. 
PCIe and PCI-X are registered trademarks of PCI SIG. 
Phoenix and PhoenixBIOS are registered trademarks of Phoenix Technologies Ltd. 
Red Hat and all Red Hat-based trademarks are trademarks or registered trademarks of Red Hat, Inc. in the United States and other countries. 
SUSE LINUX and the SUSE logo are registered trademarks of Novell, Inc. 
UNIX is a registered trademark in the United States and other countries, licensed exclusively through X/Open Company, Ltd. 

All other trademarks mentioned herein are the property of their respective owners. 

Adaptec, Host, and the Adaptec logo are registered trademarks of Adaptec Inc. 

Содержание Rackable C2112-4G3









































































































Отзывы:

Нет отзывов

Похожие инструкции для Rackable C2112-4G3

Lantronix xPort Pro XPP1004000-02R Integration Manual preview
xPort Pro XPP1004000-02R
Бренд: Lantronix Страницы: 17
xFusion Digital Technologies FusionServer G8600 V7 Manual preview
FusionServer G8600 V7
Бренд: xFusion Digital Technologies Страницы: 112
Supermicro A+ AS -2114GT-DNR User Manual preview
A+ AS -2114GT-DNR
Бренд: Supermicro Страницы: 126
Inspur NF5486M5 Installation Manual preview
NF5486M5
Бренд: Inspur Страницы: 2
Fujitsu PRIMERGY BX620 S5 Options Manual preview
PRIMERGY BX620 S5
Бренд: Fujitsu Страницы: 50
Fujitsu PRIMERGY BX620 S4 Operating Manual preview
PRIMERGY BX620 S4
Бренд: Fujitsu Страницы: 81
Fujitsu PRIMERGY BX900 S1 Service Supplement Manual preview
PRIMERGY BX900 S1
Бренд: Fujitsu Страницы: 46
Fujitsu PRIMERGY BX620 S6 Options Manual preview
PRIMERGY BX620 S6
Бренд: Fujitsu Страницы: 56
Fujitsu Primergy BX920 S4 Operating Manual preview
Primergy BX920 S4
Бренд: Fujitsu Страницы: 66
Fujitsu PRIMERGY BX920 S2 Options Manual preview
PRIMERGY BX920 S2
Бренд: Fujitsu Страницы: 70
Fujitsu PRIMERGY BX920 S2 Operating Manual preview
PRIMERGY BX920 S2
Бренд: Fujitsu Страницы: 102
Fujitsu PRIMERGY BX400 S1 Options Manual preview
PRIMERGY BX400 S1
Бренд: Fujitsu Страницы: 60
Fujitsu PRIMERGY BX900 S1 Operating Manual preview
PRIMERGY BX900 S1
Бренд: Fujitsu Страницы: 144
Fujitsu Primergy BX900 S2 Operating Manual preview
Primergy BX900 S2
Бренд: Fujitsu Страницы: 108
Fujitsu PRIMERGY BX600 PG-LNB101 User Manual preview
PRIMERGY BX600 PG-LNB101
Бренд: Fujitsu Страницы: 28
Fujitsu PRIMERGY BX600 S3 Hardware Manual preview
PRIMERGY BX600 S3
Бренд: Fujitsu Страницы: 103
Fujitsu PRIMERGY BX620 S5 Operating Manual preview
PRIMERGY BX620 S5
Бренд: Fujitsu Страницы: 96
Fujitsu PRIMERGY BX600 S2 Operating Manual preview
PRIMERGY BX600 S2
Бренд: Fujitsu Страницы: 173

Бренды по названию

Популярные бренды

Загрузить еще бренды