Silicon Graphics Rackable C2110G-RP5, Руководство пользователя системы, Страница: 19 / 78

Server Chassis Features
007-5841-001 5
Server Chassis Features
The following subsections provide a general outline of the main features of the SGI Rackable
C2110G-RP5 server chassis.
System Power
The Rackable C2110G-RP5 2U server chassis features a redundant power supply composed of
two separate power modules. This power redundancy feature allows you to replace a failed power
supply without shutting down the system. Note that each power supply provides up to 900 Watts
of power to the system.
Serial ATA Subsystems
The server chassis supports up to ten 2.5-in SATA drives. Drives 0 and 1 are SATA 3.0
6-Gb/second slots, drives 2-9 are 3-Gb/second (SATA 2.0) disk drives. RAID drives are
hot-swappable units and are connected to a backplane that provides power and control. Note that
the operating system you have installed must support RAID to enable the hot-swap capability of
RAID drives. Certain RAID levels require use of optional hardware to support RAIDed hard disk
drives in the server.
Front Control Panel
The control panel on the C2110G-RP5 server provides you with system monitoring and control.
LEDs that indicate system power, HDD activity, network activity, system overheat and a system
overheat/fan-fail/ UID LED. A main power button and a system reset button are also included.
Serverboard and GPU Subsystem
The C2110G-RP5 server chassis is an ATX form factor chassis designed to be used in a 2U
rackmount configuration. The serverboard’s I/O backplane supports up to four standard size
(double-width) GPUs to enable high-quality GPU computing solutions. A 15-pin VGA port, two
USB 2.0 ports, two Gigabit LAN ports and a dedicated RJ-45 IPMI LAN port are also supported.
The GPUs process complex image calculations and then route the data out through the VGA port
on the serverboard. The GPUs, which come with a passive heatsink attached, have been tested for
use with this system.