Silicon Graphics Rackable C1110-RP6, Руководство пользователя

Страница: 14 / 58

2 007-5843-002
1: Introduction and Overview
Warning:
If a lithium battery is installed in your system as a soldered part, only qualified
SGI service personnel should replace this lithium battery. For a battery of another type,
replace it only with the same type or an equivalent type recommended by the battery
manufacturer, or an explosion could occur. Discard used batteries according to the
manufacturer’s instructions.
System Overview
The SGI ® Rackable™ C1110-RP6 system is a compute-optimized server comprised of two main
subsystems: the 1U chassis and a serverboard (motherboard). Check with your sales or service
representative before loading any operating system on your server not provided by the SGI factory
or service organization.
Various hardware components may be included as part of your SGI Rackable C1110-RP6 system
configuration as listed below:
• Serverboard with:
– Two Intel ® Xeon ® E5-2600 or E5-2600v2 Series processors in LGA2011 sockets
– Intel C602 chipset and Quick Path Interconnect system bus support the processors
– Sixteen DDR3 memory DIMM slots
– Two external Gen3 x16 PCIe slots (one full-height and one low-profile)
• Two disk drive configurations include:
– Four 3.5-inch hard disk drives plus DVD option drive
– Ten 2.5-inch hard disk drives (no DVD option available)
• Seven 4-cm counter-rotating cooling fans for the serverboard
• One 450 Watt auto-ranging power supply (with single power connector)
• Optional 650 Watt redundant auto-ranging power supply (with dual power connectors)
Note: The TYAN S7056 serverboard is the standard C1110-RP6 motherboard offering.
Other customized offerings may be available for specific system or clustering needs. Check
with your SGI sales or service representative for additional information.