manualshive.com logo in svg

Silicon Graphics IRIS Indigo, Руководство пользователя, Страница: 172 / 228

Поделиться
Скачать
Silicon Graphics IRIS Indigo Скачать руководство пользователя страница 172

156

Chapter 6: Troubleshooting

Checking and Removing Memory

Before removing memory, check to make sure all SIMMs are seated correctly in their
slots.

1.

Remove covers and the CPU Board.

Follow the instructions in “Replacing the CPU Board or CPU Module” on page 141.

2. Set the CPU board down on a flat, anti-static surface so the side with the large chips

faces up.

3. Check to see that all the SIMMs are installed correctly.

If you have an IRIS Indigo R3000 system:

■

A SIMM is installed correctly when you see no space between the socket and
the bottom row of small chips, and you cannot easily lift the white lever.

■

The white tool is for removing the SIMM. If you can easily lift the tool, the
SIMM isn’t in all the way. Press down on both sides of the SIMM to push it
further into the socket.

If you have an IRIS Indigo R4000 family system:

■

A SIMM is installed correctly when it is vertical and perpendicular to the CPU
board, and the latches on the sides of the SIMM fit snugly around it.

4. Once the SIMMs are all the way in, replace the CPU board and power up the

system. See “Replacing the CPU Board and Covers” on page 148 for instructions.

5. If the error message still says:

Check or replace SIMM#

You have a faulty SIMM. Follow the instructions in “Ordering Replacement Parts”
on page 135. Then contact your service provider for further instructions.

Replacing SCSI Devices

To replace an external SCSI device, you’ll unmount the device (if it was mounted), power
down the system, disconnect the device, connect the new device, and power up the
system.

Содержание IRIS Indigo





































































































































































































































Отзывы:

Нет отзывов