Silicon Graphics InfiniteStorage 120 Скачать руководство пользователя страница 26 | Manualshive

Страница: 26 / 42

Silicon Graphics InfiniteStorage 120 Скачать руководство пользователя страница 26

InfiniteStorage 120 Hardware Topics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

18

Turning On the Power to the Drive Module

Access the power switches from the rear of the drive module.

N

OTE

While power is being applied to the drive module, the lights on the front and the
rear of the drive module intermittently come on and go off.

1

Make sure that all of the power cords are connected.

I

MPORTANT

If the power cords are not connected, make sure that both power
switches on the power-fan canisters in the drive module are turned off
before connecting the power cords or turning on the circuit breakers in
the cabinet.

2

Turn on the main circuit breakers in the cabinet.

3

Turn on the power switch on both power-fan canisters in the drive module.

shows the location of the power switch on each power-fan canister in the drive
module.

Figure 14 Power Switches on a Drive Module

1.

Power Switch

I

MPORTANT

The drive modules might take several minutes to turn on completely.

4

Determine the status of the drive module by checking all of the lights on the bezel,
disk drives, power-fan canisters, and ESMs in the drive module. Make sure that all of
the lights show normal operation.

«
...
24
25
26
27
28
...
»

Содержание InfiniteStorage 120











































Отзывы:

Нет отзывов