Silicon Graphics ICE X, Руководство пользователя

Страница: 97 / 142

2U Service Nodes
007-5806-004 77
C2110G-RP5-P 2U Service Node
Figure 5-8 shows front and rear views of the SGI Rackable C2110G-RP5-P 2U service node. Note
that this server uses up to eight DIMM memory cards, (four per processor). Separate QPI link pairs
connect the two processors and the I/O hub in a network on the server’s motherboard. The server
has internal riser cards that support up to six optional GPU cards and also one external (non-GPU)
PCIe card at the rear of the chassis. Available numbers of GPU and PCIe option cards may be
limited by ambient temperature restrictions. Check with your SGI sales or service representative
for additional information on GPU configurations. See the
SGI Rackable C2110G-RP5-P System
User Guide (P/N 007-6343-00 x ) for more detailed information on this 2U service node.
PCI expansion slots
!
2 1
System
reset
System
LEDs
Main
power
Ten disk drive bays
VGA
port
Ethernet
ports
USB
ports
IPMI
LAN
Figure 5-8 Front and Rear Views of the SGI C2110G-RP5-P 2U Service Node
The control panel on the C2110G-RP5-P service node provides you with system monitoring and
control. A main power button and a system reset button are located at the top of the panel. LEDs
that indicate system power is on, HDD activity, network activity, power supply status and a system
overheat/fan-fail/ UID LED are included. The C2110-RP5-P 2U server’s control panel features are
shown in Figure 5-9 and described in Table 5-3 on page 78.