manualshive.com logo in svg

Silicon Graphics ICE X, Руководство пользователя, Страница: 45 / 142

Поделиться
Скачать
Silicon Graphics ICE X Скачать руководство пользователя страница 45

007-5806-004

25

Chapter 3

3.

System Overview

This chapter provides an overview of the physical and architectural aspects of your SGI Integrated 
Compute Environment (ICE) X series system. The major components of the SGI ICE X systems 
are described and illustrated in the following sections:

•

“System Models” on page 26

•

“SGI ICE X System and Blade Architectures” on page 29

•

“System Features and Major Components” on page 38

Because the system is modular, it combines the advantages of lower entry-level cost with global 
scalability in processors, memory, InfiniBand connectivity and I/O. You can install and operate 
the SGI ICE X series system in your lab or server room. Each 42U SGI rack holds one or two 
21U-high (blade enclosure pairs). An enclosure pair is a sheetmetal assembly that consists of two 
18-blade enclosures (upper and lower). The enclosures used in D-rack configurations are 
separated by two “shelves.” In D-rack systems the shelves each hold three power supplies (shared 
by the blade enclosures). In M-rack systems 1U shelves are used only to hold the blade enclosure 
pairs and the power supplies are positioned on the sides of the blade enclosures. Each blade 
enclosure also has an internal InfiniBand communication backplane. The 18 compute blades 
supported in each enclosure can use one or two node boards, with ASICs, processors, memory 
components and I/O chip sets mounted on them. The blades slide directly in and out of the 
enclosures. Every compute node in a blade contains four or eight dual-inline memory module 
(DIMM) memory units per processor socket. Optional hard disk or solid-state (SSD) drives and 
MIC or GPU option boards are available. Each compute blade supports one or two individual node 
boards. Note that a maximum system size of 72 compute blades per rack is supported at the time 
this document was published. Optional chilled water cooling may be required for large 
processor-count rack systems. Contact your SGI sales or service representative for the most 
current information on these topics.

The SGI ICE X series systems can run parallel programs using a message passing tool like the 
Message Passing Interface (MPI). The SGI ICE X blade system uses a distributed memory scheme 
as opposed to a shared memory system like that used in the SGI UV series of high-performance 
compute servers. Instead of passing pointers into a shared virtual address space, parallel processes 
in an application pass messages and each process has its own dedicated processor and address 
space. 

Содержание ICE X















































































































































Отзывы:

Нет отзывов