Silicon Graphics Altix ICE 8000 Series, Краткое руководство пользователя

Страница: 55 / 84

Scali Manage TM On SGI
®
Altix
®
ICE System Quick Reference Guide
Starting with the nodes powered off, install the compute nodes from the SGI Altix
ICE admin node, as follows:
scalimanage-cli install r01i01n0[2-6]
DHCP requests can be followed on the rack leader nodes, as follows:
r01lead# tail -f /var/log/messages
You can follow the installation and boot of the nodes (or of representative nodes)
using either the Scali Manage consoles (from the GUI) or using
ipmitool
SOL
console interface.
10. From the admin node, verify that
/home
is mounted as expected, as follows:
# scashdc -p mount | grep home | sort
r01i01n02-eth0 : service1-ib1:/home on /home type nfs (rw,_netdev,addr=10.1.0.1)
r01i01n03-eth0 : service1-ib1:/home on /home type nfs (rw,_netdev,addr=10.1.0.1)
r01i01n04-eth0 : service1-ib1:/home on /home type nfs (rw,_netdev,addr=10.1.0.1)
r01i01n05-eth0 : service1-ib1:/home on /home type nfs (rw,_netdev,addr=10.1.0.1)
r01i01n06-eth0 : service1-ib1:/home on /home type nfs (rw,_netdev,addr=10.1.0.1)
Configuration Session Example
This is section shows a complete SGI Altix ICE configuration example, as follows:
scalimanage-cli initaltixicesms /tmp/ofed.stout5sp2.rpms.tgz
scalimanage-cli definealtixicerack 1 [1-2] [1-2]
scalimanage-cli definealtixiceservicenode service1
/etc/init.d/scance restart
scalimanage-cli discoveraltixiceservicenode
scalimanage-cli install "service1 r01lead"
scalimanage-cli discoveraltixicecmc
scalimanage-cli captureimage service1 image1
scalimanage-cli setdiskless r01i[01-02]n[01-02] image1
scalimanage-cli install r01i[01-02]n[01-02]
Using the Scali Manage GUI
This chapter provides general administrative information section and information on
starting and using the Scali Manage GUI in a Scali managed cluster. For information
on using the Scali Manage command line interface, refer to the
Scali Manage User’s
Guide .
007–5450–001 37