xiii
About This Guide
This guide tells you how to remove and install field replaceable units (FRUs) internal to
the server. Only trained or qualified technical personnel should work inside the chassis.
Note:
Information on the server’s system setup utility (SSU) and replacement of external
devices are covered in the SGI 1400 Server Family User’s Guide.
The following topics are covered in this manual:
•
Chapter 1, “Working Inside the System,” contains all the power and ESD warnings
applicable to working inside the system. The chapter introduces proper access
procedure, how to install option boards, and understand internal SCSI and IDE
cabling.
•
Chapter 2, “Upgrading Baseboard Components,” covers removing and installing
the baseboard, processors, memory DIMMs, and VRMs.
•
Chapter 3, “SGI 1400 Server SCSI Backplane Installation,” details the steps for
replacing the server system SCSI backplane.
•
Chapter 4, “Technical Reference,” lists information on connector pinouts and
baseboard locations, baseboard jumpers, I/O addresses, memory map addresses,
baseboard interrupts, and video modes.
•
Appendix A contains a group of equipment logs and worksheets that should be
used when maintaining or upgrading the server.
•
Appendix B lists the server’s basic environmental specifications.
•
Appendix C provides additional basic chassis warnings and voltage related
cautions.
Содержание 1400
