Document: ML000043 Rev 1
Page 1 of 1
© 2009 Silicon Controls Pty Ltd All Rights Reserved
Disclaimer
All material contained in this document is furnished pursuant to the terms and conditions of a duly executed Product
Licence ("Licence") and/or a duly executed Agreement to Purchase or Lease Equipment ("Agreement") and/or a duly
executed Non-Disclosure Agreement (“NDA”). All terms, conditions, warranties, undertakings, inducements or
representations, whether express, implied, statutory or otherwise, relating in any way to the products the subject of
the Licence and/or the Agreement and/or the NDA are excluded, other than:
1. terms, conditions or warranties expressly provided for in the Licence and/or the Agreement and/or the NDA; and
2. terms, conditions or warranties implied by any Act of Parliament which may not be excluded
provided that the liability of Silicon Controls Pty Ltd for any breach of any such term, condition or warranty shall,
subject to the Licence and/or Agreement, be limited at the option of Silicon Controls Pty Ltd to any one or more of the
following:
(a) if the breach relates to goods:
(i)
the replacement of the goods or the supply of the equivalent goods;
(ii)
the repair of the goods;
(iii)
the payment of the cost of replacing the goods or of acquiring equivalent goods; or
(iv)
the payment of the costs of having the goods repaired; and
(b) if the breach relates to services:
(i)
the supplying of the services again; or
(ii)
the payment of the cost of having the services supplied again.
Without limiting the generality hereof, Silicon Controls Pty Ltd shall not be under any liability to any person in respect
of any loss or damage, including consequential loss or damage and however caused, which may be suffered or
incurred or which may arise directly or indirectly from the use of the material contained in this document or any other
material furnished pursuant to the Licence and/or the Agreement and/or the NDA.
All the users of the material contained in this document or any other material furnished pursuant to the Licence and/or
the Agreement and/or the NDA should ensure that the material is used in compliance with the laws, rules and
regulations of the jurisdictions in which the material is used. The material contained within is subject to change
without notice and Silicon Controls Pty Ltd may issue revised documents containing any such changes.
Change History
Revision
Date
Description of Change
Prepared By
Approved By
1 2009-12-02
Release for FCC Certification
JH
MN
