Document: ML000043 Rev 1
Page 6 of 6
© 2009 Silicon Controls Pty Ltd All Rights Reserved
4 FCC PART 15 COMPLIANCE
The following instructions apply to SC414Cxx11 equipment:
GASLOG equipment has been tested and found to comply with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
GASLOG equipment generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with the installation manual, may cause harmful interference with radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user may try to correct the interference by one or more of the following:
o
Reorient or relocate the receiving antenna of the radio or television.
o
Increase the separation between the equipment and the receiver.
o
Connect the equipment onto an outlet on a different branch circuit than that of the receiver.
o
Consult the dealer or an experienced radio/TV technician.
The user may find the following booklet helpful:
o
How to Identify and Resolve Radio-TV Interference Problems
This booklet is available from the US Government Printing Office, Washington, D.C. 20402.
WARNING: changes or modifications to GASLOG equipment not expressly approved by Silicon Controls
could void the user's authority to operate the equipment.
