Operating Instructions
Shelf Instructions
To remove a shelf from it’s
locked position, tilt the shelf
as shown in Fig C and pull
outward.
To re-install, ensure the shelf
is resting securely on the sup-
port brackets and push shelf
inward until it locks into place.
Please Note:
The bottom
shelf in both sections of the
cabinet are not secured in
place (locked). Do not attempt
to pull on the shelf when
either it is stocked with wine.
IMPORTANT!
Do not cover shelves with
aluminum foil or any other
material that will prevent
adequate air circulation
within the cabinet.
Fig C
8
Caster Roller
Installation
(Fig.3 C) from spare parts box;
brake (Fig.2 front wheel) in the front bottom of cabinet and fix
freely.
Fig.1
Fig.2
Fig.3
a
b
c
a
b
WARNING!
Please do
not
put any goods
Please unplug powercord
and release the brake before
moving the cabinet;
on top of the cabinet and
avoid slanting the cabinet
when moving it.
Do not let children climb the
cabinet when moving it to
another location;
Push the cabinet from the
back when going over slopes
and bumps when moving the
cabinet to avoid the door
from opening.
Please do
not
use the cabinet
outside in bad weather to
avoid a short circuit.
1. Take out the 2 castors (Fig.1 rear wheel), caster
with brake (Fig.2 front wheel) and 8 M5x10 screws
2. This installation needs two people, one person to tilt the cabinet
back and another person to assemble the 2 casters with
them with 2 M5x10 screws for each wheel.
3. Please release brake (Fig.2 front wheel) and assemble the
2 casters at the back bottom of the cabinet with 2 M5x10
screws for each wheel.
4. Please twist the wheel clockwise and move the cabinet