Silhouet-Tone ESSENTIAL Peel, Инструкция по эксплуатации

Страница: 9 / 24

420903-
Essential Peel Instructions Manual-rev000
l
8
ATTENTION:
ü
Be careful not to damage the filter’s plastic mesh when pull it out.
ü
Make sure that the two seals (rubber O rings # 1) are on the filter and that the plastic mesh (# 2) is not
perforated.
How to change the external, large safety filter (ST Code 416613):
1. Metallic Tabs 3. Black connector
2. Filter 4. White connector
IMPORTANT
§
The external safety filter, located on the back panel, will need changing yearly, depending on usage . The main
external filter protects your motor against fine particles which can reduce the efficiency or damage your unit .
§
It is important to only use corundum crystals recommended by Silhouet-Tone.
Using Silhouet-Tone corundum
crystals will prolong the life of your filters and ensure the proper operation of your unit.
§
The external safety filter is good for 1 (one) year, it is always prudent to keep an extra filter in stock.
§
Filter should be changed when projection intensity drastically decreases and filter lines are no longer visible
( This indicates the filter is filled up with crystal particles and skin debris).
Procedure:
§
Press on the two metallic tabs (#1) and pull the filter out of the connectors.
§
Replace the large safety filter (#2)
§
Match the white and black filter (#3, #4) connectors to the Essential Peel connectors.
§
Push the filter assembly into position (you should hear two clicks).