420903-
Essential Peel Instructions Manual-rev000
l
5
Turning the unit ON
Important to respect the following sequence:
1.
Connect the power cord to the back panel of the unit. Plug it into the wall (the wall plug will only fit a three
prong grounded power outlet).
2.
Connect the handpiece (as per instructions below).
3.
Install empty crystal container in place (used crystals #7) (as per instructions below).
4.
Install new crystal container in place (#6) (as per instructions below).
5.
Turn on the main power switch on the back of the unit (#1).
The LED indicator on front panel will light up.
6.
Wait at least 10 seconds for unit to warm up.
7.
Press the “START / STOP” key (#2 on the front panel)
.
8.
Adjust the abrasion/vacuum power with the intensity key (#3 on the front panel)
.
9.
The intensity will appear on your screen (#13).
2.1
Connecting the Handpiece
WARNING:
ü
IMPROPER TUBE CONNECTION WILL BLOCK THE UNIT!
ü
NEVER connect the handpiece while the unit is ON.
Connecting the handpiece | Connecting the plastic tubes
§
The narrow hose connects to the front panel’s small connector and to the handpiece’s small connector.
§
The larger hose connects to the front panel’s large connector and to the handpiece’s large connector.
NOTE:
Narrow hose = clean crystals; Larger hose = used crystals. Both hoses must be inserted at least 1 cm (1/2 inch)
into their respective connectors.
§
Place the handpiece in its support (cradle).
Handpiece
1. Disposable plastic tips.
2. O-Ring.
3. Spiral head.
4. Handpiece body.
5. Quick connect fitting.
Содержание ESSENTIAL Peel
Страница 1: ......
