Silex technology SX-550, Руководство разработчика

Страница: 105 / 123

Command Description
SET IP RARp nn
nn: 0=both 1=no subnet, 2=no router, 3=neither
SET IP REtry Enables or disables LPD retry on incomplete job
The default value is Disable.
Format:
SET IP REtry [ENable | DIsable]
SET IP ROuter Sets default router address
The default value is 0.0.0.0.
Format:
SET IP ROuter aa.bb.cc.dd
SET IP SUbnet Sets IP subnet mask
The default value is 0.0.0.0.
Format:
SET IP SUbnet aa.bb.cc.dd
SET IP TCP Enables or disables the raw TCP 9100 protocol
The default value is Enable.
Format:
SET IP TCP [ENable | DIsable]
SET IP TELnet Enables or disables Telnet protocol
The default value is Enable.
Format:
SET IP TELnet [ENable | DIsable]
SET IP TFTP Enables or disables TFTP protocol
The default value is Enable.
Format:
SET IP TFTP [ENable | DIsable ]
SET IP TImeout Sets TCP inactivity timeout.
If fast timeout is enabled, the timeout is calculated as seconds.
If fast timeout is disabled, the timeout is calculated as minutes.
The default value is 1 minute.
Format:
SET IP Timeout n
SET IP WIndow Sets TCP maximum window size in bytes
The default value is 10240.
Format:
SET IP WIndow nn
Part Number 40183-101 Silex SX-550 Developer's Guide Page 97