2-12
About PRICOM
Users Manual CX
Connection to the Network
1. Make sure that the AC adapter is not
connected to PRICOM C-5100, and
switch off the printer.
2. Connect the network cable to the
network port of PRICOM C-5100.
3. Connect the other end of the network
cable to the Ethernet HUB.
4. Connect the AC adapter to PRICOM
C-5100, then switch on the printer
and check for proper printer
functions.
Using an AC adapter other than the one supplied may cause damage.
When using PRICOM in a 100 BASE-TX environment, make sure to use a
100BASE-TX compatible HUB and twisted pair cable (Category 5 or above).
Ethernet HUB
Network Cable
TIP
TIP
The following items are needed to connect PRICOM C-5100 to the network.
Prepare the following items.
