Silex technology DS-700AC, Руководство пользователя

Страница: 196 / 200

188
DS-700AC User's Manual
The IP address assigned to the DS-700AC may be in use by another network device.
Solution
First, turn off DS-700AC and open the Windows Command Prompt.
Ping the IP address of DS-700AC.
1. Select Start - All Programs - Windows System - Command Prompt .
2. When the Command Prompt appears, execute the ping command.
Example of executing the ping command when the IP address of DS-700AC is
192.168.0.20
If there is a reply while DS-700AC is turned off, it means there is another network device
using the same IP address as DS-700AC. In such a case, change the IP address of either
DS-700AC or the other network device.
The USB device connected to DS-700AC may not be powered on.
Solution
Check the LEDs on the USB device to see if it is powered on. If the USB device is not
powered on, confirm the AC adaptor is connected properly.
Also, if the USB device is a bus-powered device, it may require power exceeding the
maximum power capability of DS-700AC (e.g. HDD drive, etc.). In that case, please use
the AC adaptor bundled with the USB device.
Microsoft Windows [Version 6.1.7601]
(C) Copyright (c) 2009 Microsoft Corporation. All right reserved.
C:\Users\username>
ping 192.168.0.20 (Press Enter)
Pinging 192.168.0.20 with 32 bytes of data:
(When there is reply)
Reply from 192.168.0.20: bytes=32 time<1ms TTL=128
Reply from 192.168.0.20: bytes=32 time<1ms TTL=128
Reply from 192.168.0.20: bytes=32 time<1ms TTL=128
Reply from 192.168.0.20: bytes=32 time<1ms TTL=128
(When there is no reply)
Reply from 192.168.0.10: Destination host unreachable
Reply from 192.168.0.10: Destination host unreachable
Reply from 192.168.0.10: Destination host unreachable
Reply from 192.168.0.10: Destination host unreachable