Silex technology DS-700AC, Руководство пользователя

Страница: 192 / 200

184
DS-700AC User's Manual
How should I determine the way to assign an IP address to DS-700AC?
There are two ways to assign an IP address to DS-700AC; one is to Get IP address automatically from
DHCP server
and the other is to
Assign IP address manually
. Choose the way to assign an IP address
according to your environment.
When there is a DHCP server in the network environment
Solution
You can use Get IP address automatically from DHCP server. As DS-700AC is set by default
to Get IP address automatically, DS-700AC will obtain an IP address appropriate to your
network environment from the DHCP server just by powering up DS-700AC.
Refer to
8-5-2. Resetting to Factory Default
for details on how to reset DS-700AC to the
factory default settings.
DS-700AC may not be in the same network segment (environment without a router) as your PC.
Solution During the initial configuration, place DS-700AC and PC in the same network segment.
Communication error occurs when configuring with Device Server Setup.
When a communication error occurs during Device Server Setup, the cause needs to be determined
from the settings of the PC used for the configuration.
In the environment where there is DHCP server, the DHCP server may have configured the IP
address of the different segment to a PC.
Solution
Please select
Obtain an IP address automatically
at Internet Protocol (TCP/IP) Properties
of the PC.
Otherwise connect the PC and DS-700AC with a crossover cable or to the standalone
Ethernet Hub and see how it works.
If DS-700AC has been used in another network, it may have the settings not allowing the
communication with your PC.
Solution Please reset DS-700AC to the factory default setting. Refer to Resetting to
8-5-2.
Resetting to Factory Default for details.