Hearing Protector
According to standards EN 352-1:2002, EN 352-3:2002, EN 352-4:2001/A1:2005, EN 352-6:2002, EN 352-8
Product/model:
Silentex A-Com BT, Natural XPB, FM XPB, WiCom FM, Multi XPB;
a cup model electronic hearing protector with adjustable headband.
A-Com BT Cap, Natural XPB Cap, FM XPB Cap, Multi XPB Cap, WiCom Cap, WiCom Natural Cap, WiCom Multi Cap; a cup model hearing protector
with a helmet mounting. A-Com BT NB, Natural XPB NB, FM XPB NB, WiCom FM NB, Multi XPB NB: a cup model hearing protector with neck band
made of stainless spring steel and plastic head strap. The type of cushions: replaceable, made of flexible foam filling and PVC foil. Headband is made
of spring steel, cover material is PVC foil with foam filling. Helmet mounted models: adjustment arms are made of plastic and stainless steel. Natural
XPB, Multi XPB, WiCom Natural, WiCom Multi: This earmuff is provided with level-dependent attenuation and electrical audio input. The wearer should
check correct operation before use.
Warning - The output of the level-dependent circuit of this hearing protector may exeed the external sound
level.
The audibility of warning signals at a specific workplace may be impaired while using the entertainment facility.
Recommendation:
The wearer should ensure that the ear-muffs are fitted, adjusted and maintained in accordance with the manufacturer’s instructions.
Also ensure that the ear-muffs are worn at all times in noisy surroundings and that the ear-muffs are regularly inspected for serviceability. Warning: If
these recommendations are not adhered to, the protection afforded by the ear-muffs will be severely impaired.
Fitting/Adjustment instructions Headband models:
1. A cup model hearing protector designed to be used in an over the head position.
2. Adjust the ear-cups to their lowest position (fig. 1).
3. Place the cups over the ears (fig. 2).
4. Adjust the headband so that it rests comfortably on the top of the head. Make sure that the cushions are seated firmly on the sides of the head and
around the ears (fig 3).
Fitting/Adjustment instructions neck band models:
Place the ear cups over the ears and adjust the head strap so that it rests comfortably on the top of the head. Make sure that the cushions are seated
firmly on the sides of the head and around the ears.
Fitting/Adjustment helmet mounted models:
Cap - ear muff models are designed to be worn in conjunction with a safety helmet. The ear muffs are attached to the safety helmet with adapters.
Instructions of attaching the adapter to the spring housing: (fig 7-10):
- Parts: a) spring housing b) adapter c) locking ring (fig 7)
- Place the spring housing and the adapter together (fig 8)
- Insert the locking ring into the plug in the spring housing from down to up. (fig 9 and 10).
The attachment of ear muffs to the safety helmet: (fig 10-15):
- Position the ear muffs onto safety helmet as shown (fig. 11-12).
- Place and adjust the ear cups over the ears (fig. 13). Make sure that the cushions are seated firmly on the sides of the head and around the ears.
- To place ear-muff in the parking position and/or stand-by position see (fig. 14 and 15).
Cleaning:
Do not use solvents for cleaning. The ear-muffs can be cleaned with a damp cloth soaked with a warm soap solution and allowed to dry
before re-use. Do not use abrasive brushes or materials which may damage the foam pads or cushions. Do not immerse the ear-muffs in water. Use
only cleaning agents that are known to not be harmful to the wearer. This product may be adversely affected by certain chemical substances. Further
information from the manufacturer.
Maintenance:
Ear-muffs and in particular cushions may deteriorate with use and should be examined at frequent intervals for example for cracking
and leakage. Replace the cushions as necessary, at least every 6 months. Pull off the old cushions (fig. 4) and press the new ones carefully and firmly
on all areas into their proper place on the ear-cups. The headband should not be flexed or adjusted unnecessarily, as the correct pressure is an
important factor in maintaining the attenuation afforded by these ear-muffs. Do not open the cups or remove the foam liners. If the cups are opened,
warranty of the product is no longer valid.
Storage:
Before and after using ear-muffs store them in a clean and dust free place. It is common that moisture may occur in side the ear cups in long-
term use. Therefore it is important to dry the moisture inside the cups to prevent damages caused by corrosion.
After long-term use it is recommended
to turn the ear cups outwards to allow the foam linings to dry.
Spare parts:
Note: The fitting of hygiene covers (Comfort rings) to the cushions may affect the acoustic performance of the earmuffs.
Hygiene kit
A-Com BT / Cap, Natural XPB / Cap, FM XPB / Cap, Multi XPB / Cap
6000800
WiCom / Cap, WiCom FM / Cap, WiCom Natural / Cap, WiCom Multi / Cap
6000700
Charger
18030
USB Charging cable
18107
Comfort rings
6001200
In-car charger
18035
Approval:
A-Com BT, A-Com BT Cap, Natural XPB Cap:
These hearing protectors are approved in accordance with the PPE directive 89/686/EEC and European
standard EN 352 at FIOH (Finnish institute of Occupational Healt, Topeliuksenkatu 41 a A, FI-00250 HELSINKI, FINLAND), Notified Body no. 0403.
A-Com BT NB, Natural XPB, Natural XPB NB, FM XPB, FM XPB Cap, FM XPB NB, Multi XPB, Multi XPB Cap, Multi XPB NB, WiCom Cap,
WiCom Natural Cap, WiCom Multi Cap, WiCom FM NB:
These hearing protectors are approved in accordance with the PPE directive 89/686/EEC
and European standard EN 352 at SAI GLOBAL ASSURANCE SERVICES LTD, PARTIS HOUSE, GROUND FLOOR, DAVY AVENUE, KNOWLHILL,
MILTON KEYNES, MK5 8HJ, UNITED KINGDOM, NB2056.
Quarantee:
There is a 12 month guarantee from the date of purchase. This guarantee does not cover damages caused by incorrect use, service,
modification or assembly undertaken without prior permission obtained from the manufacturer. Receipt of purchase is a warranty certificate.
For futher information please contact local seller or:
Silenta Group Oy
www.silenta.com
Länsiväylä 7
FI-40700 Jyväskylä
tel. +358 14 3771 522
Finland
fax. +358 14 3771 622