Silca Delta 2000 FO, Руководство по эксплуатации

Страница: 19 / 25

Operating manual - English DELTA 2000 FO
Copyright Silca 1998 15
7.3 Tracer point replacement
To replace the tracer point (F), proceed as
follows (fig.20):
ATTENTION: unplug the machine from the mains.
1) loosen and remove the tracer point
locking screw (F1).
2) remove the tracer point.
3) fit the new tracer point.
4) re-gauge the machine as described in
chapter 6 on page 11.
Fig. 20
7.4 Replacing the fuses
ATTENTION: unplug the machine from the mains.
1) detach the wiring from the machine plug;
2) turn the key-cutting machine so that the fuse box is easily reached;
3) remove the fuse box placed below the power inlet (K) (fig.21);
4) replace the fuses (L);
5) close the fuse box and connect the power cable.
ATTENTION: the fuses must both be of the same type (rapid) and with the same amps (3,15 Ampere on 230V, 6,3
Ampere on 110V).
Fig. 21
F
F1
L
K