Copyright Silca 2006
31
Operating Manual - English
SBB
9
HELP MENU
This function is enabled after the selection of car make and model.
The following help functions are available:
F1
Press the function key
“F1”
to read information relating to the MAKE/MODEL selected:
- MAKE
- MODEL
- YEAR
- REFERENCE (SILCA)
- ORIGINAL TRANSPONDER
- MEMORIZATION PROCEDURE
- MAX. NUMBER OF KEYS THAT CAN BE MEMORIZED
- CONNECTOR TO USE
- ADAPTER TO USE
- CONNECTOR POSITION
Example:
- Connect: type of cable to use to connect with the immobilizer (see ID label on the cable);
- Pos.Con: position on the vehicle of the diagnostics socket to which the device can be connected; press F3
– F4 to access the information.
- Key Ref.: Silca key to use for the car model selected
- Orig.Tr.: type of transponder used on the original key
- RW2/RW3 ID: ID code for transponder used by RW2/RW3.
- No. Key: max. number of keys that can be memorized on the vehicle (when the maximum number of keys
is reached, a key must be erased from the memory in order to memorize a new one).
- Self P.: description of the direct programming procedure.
NOTE: correspondence of the original transponder to the Silca key to be used should be checked
with the RW2/RW3 for the type of transponder.
The F2-F3-F4 help menus are now available (see last bottom line).
F2
Direct programming
is a memorization/deletion method for new keys on the vehicle which does not require
diagnostics. The procedure is active on certain models only, as its use depends on the policy of the car
manufacturer.
Press the
“F2”
function key; the display will show the direct programming procedure:
- CAR MAKE -
A2:
(95-96)
CONNECT:
00
Pos.Con.:
(F3-F4)
KEY REF:
HU66AT6
Orig.Tr:
MEG/CR
RW2/RW3 ID:
48
F2-F3-F4
N.KEY:
8
Self P.:
(F2)
- CAR MAKE -
ON BOARD PROGRAM A
1 - Programming new
keys without use of
programmed keys
