manualshive.com logo in svg

Silca D432985XA, Руководство по эксплуатации

Поделиться
Скачать
Silca D432985XA Скачать руководство пользователя страница 27

Copyright Silca 2006

23

Operating Manual - English

SBB

7

MODEL CHANGE

Use the SMART CARD “MODEL CHANGE” (optional) to enable the software for a given machine. To do 
so, insert the SMART CARD “MODEL CHANGE” into the SBB device before turning it on (see fig. 6).

Fig. 6

- Turn on the machine.

ENABLING COMPLETE

If enabling has been carried out successfully the machine starts normally and keys and remote controls 
can be programmed for the enabled makes without using TOKENS

.

ENABLING NOT COMPLETE

If errors have occurred during enabling the display will show one of the following errors:

- Press any key to return to the previous menu.
- Check that the SMART CARD has been inserted properly and repeat the procedure.

ERROR

NUMBER

ERROR MESSAGE ON DISPLAY

CAUSE/SOLUTION

2

SMART CARD. TYPE MISMATCH

Try updating the device with the latest 
version available and if this does not 
work, return the card to Silca as it may 
be damaged

.

3

SMART CARD. ALREADY USED

The card has already been used and 
cannot be re-used

4

SMART CARD. VERSION 
MISMATCH. FIRMWARE UPDATE 
REQUIRED.

Try updating the device with the latest 
version available and if this does not 
work, return the card to Silca as it may 
be damaged

.

5

SMART CARD. DEVICE MISMATCH. 
FIRMWARE UPDATE REQUIRED.

Try updating the device with the latest 
version available and if this does not 
work, return the card to Silca as it may 
be damaged

.

6

SMART CARD. SERIAL NUMBER 
MISMATCH

Check that the device serial 
number corresponds to that 
printed on the face of the card.

 

If there is an error, return the card 
to Silca.

7

SMART CARD. WRONG FLAGS 
VECTOR

The card is damaged, return it to 
Silca.

Содержание D432985XA











































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды