Copyright Silca 2006
15
Operating Manual - English
SBB
6.6
SETUP
This section contains the various setting menus for the machine.
Select
"SETUP"
from the main menu and press
ENTER
.
- Select and press
ENTER
.
6.6.1
ENABLING
After selection the display will show:
- Select IMMOBILIZER to view the vehicle makes available for entering enabling in the “Immobilizer” function;
- Select REMOTE CONTROLS to view the vehicle makes available for entering enabling in the “Remote
Controls” function;
- Select TOKEN to view the tokens available; further tokens can be loaded.
- Select and press
ENTER
.
ENABLING MAKES (FUNCTION AVAILABLE ONLY FOR SBB FULL LOAD DEVICES)
After selecting the menu “IMMOBILIZER or REMOTE CONTROLS” the display will show
:
Select the required make to view the enabling levels available and those already enabled
.
To enter the enabling password applied for with the document provided with the software update disk
(software application FORM).
- Select the level of enabling and press
ENTER
.
- Select
ESC
to quit.
NOTE: the levels marked (*) are already enabled for operation.
- SETUP -
> 1 - ENABLE FLAGS
2 - LANGUAGE
3 - SERIAL NUMBER
4 - CALENDAR/CLOCK
5 - RELEASE
6 - STORE PASSWORD
7 - KEYS REFERENCES
- ENABLING -
> 1 - IMMOBILIZER
2 - REMOTE CONTROLS
3 - TOKEN (X)
- ENABLING -
> AUDI
FORD
NISSAN
OPEL
SEAT
- ENABLING MAKE -
LEVEL1 (*)
LEVEL2 (*)
> LEVEL3 (*)
