Siko WV5800M, Перевод оригинальной инструкции по установке

Страница: 23 / 28

WV5800M
Technical data English
WV5800M · Date 01.09.2020 · Art. No. 90104 · Mod. status 198/20
23
8.3 Right angle mating connector M12
Advice
` Strand cross-section of screened lines 0.14 ... 0.75 mm² / cable feed-
through: ø4 ... ø8 mm
• Accessory SIKO art. no. "83006" (socket contact 5 pole).
Mounting ( Fig. 4 )
1. Slide the pressure nut and housing along the cable.
2. Strip the cable, shorten the screen.
3. Strip wires and connect.
4. Screw housing with insert.
5. Tighten pressure nut.
8
31
12
Fig. 4: Right angle mating connector M12
Changing the angle position ( Fig. 4 )
1. Turn on insert, slightly pull out and rotate to desired angular position
(in steps of 45°).
2. Screw on insert.
9 Technical data
Mechanical data Additional information
Shaft stainless steel
Flange aluminum
Housing aluminum diecasting KTL coated
Speed ≤6000 rpm IP65
≤3000 rpm IP67
Moment of inertia ≤8 gcm
2
NOTICE