Siko MSK400/1, Оригинальная инструкция по установке

Страница: 17 / 28

MSK400/1
Identification English
MSK400/1 · Date 07.02.2018 · Art. No. 81145 · Mod. status 44/18
17
External magnetic fields
Failures and data loss occur if strong magnetic fields influence the internal
measuring system.
` Protect the magnetic sensor from impact by external magnets.
3 Identification
Please check the particular type of unit and type number from the identifi-
cation plate. Type number and the corresponding version are indicated in
the delivery documentation.
e. g. MSK400/1 - 0023
variant number
type of unit
The magnetic tape is identifiable by a consecutive imprint.
e. g. MBxxxx GEK WT RP NNNNNN
batch number
reference point
material carrier tape
accuracy
MB type
4 Installation
4.1 Mechanical mounting
Magnetic sensor failure
` When mounting pay attention to the IP type of protection (see chap-
ter
8
).
` Do not open the sensor yourself.
` Avoid blows to the unit.
` Do not modify the device in any way.
` The cable must be provided with strain relief. If necessary use drag
chain or protective sleeve.
Loss of measured values
` The tolerance and gap measures be observed over the whole measur-
ing length.
Exemplary sensor figures are valid for all sensor types unless described
separately.
CAUTION
CAUTION
NOTICE
NOTICE