Siko MSK400/1, Оригинальная инструкция по установке

Страница: 24 / 28

MSK400/1
Technical data English
MSK400/1 · Date 07.02.2018 · Art. No. 81145 · Mod. status 44/18
24
Disposal
The magnetic sensor's electronic components contain materials that are
harmful for the environment and are carriers of recyclable materials at the
same time. Therefore, the magnetic sensor must be recycled after it has
been taken out of operation ultimately. Observe the environment protec-
tion guidelines of your country.
8 Technical data
Mechanical data Additional information
Housing white plastic
Sensor/band reading dis-
tance
0.1 … 4 mm
Cable sheath PUR suitable for drag-chain
use
4-wire ø4.4
-0.4
mm
Cable bending radius 5x cable diameter static
7.5x cable diameter dynamic
Service life of cable >5 million cycles under the following test condi-
tions:
Travel range 4.5 m
Travel speed 3 m/s
Acceleration 5 m/s 2
Ambient temperature 20 °C ±5 °C
Electrical data Additional information
Operating voltage 24 V DC ±20 % reverse polarity protected
Current consumption <20 mA off-load
Output circuit PP
Output signals A, B 90° off-phase
Output signal level high >UB - 3.5 V
Output signal level low <2 V
Real-time requirement speed-proportional signal
output
Type of connection open cable end
plug connector
7-pole
System data Additional information
Pole length 4 mm
Resolution 1 mm with quadruple evaluation
System accuracy ±(1 + 0.03 x L) mm, L in m at T
U
= 20 °C