Siko IF09P/1, Перевод оригинальной инструкции по установке, Страница: 16 / 20

IF09P/1
Transport, Storage, Maintenance and Disposal English
IF09P/1 · Date 26.08.2019 · Art. No. 82491 · Mod. status 209/19
16
In case of an error, information concerning the encoder(s) causing the
error is displayed on the five-digit LED display, which is below the trans-
parent hood. After removing the hood, the keyboard is accessible. It
serves both for putting in various parameter values of the IF09P/1 and for
diagnosing the encoders connected.
5 Transport, Storage, Maintenance and Disposal
Transport and storage
Handle, transport and store interface with care. Pay attention to the fol-
lowing points:
• Transport and / or store interface in the unopened original packaging.
• Protect interface from harmful physical influences including dust,
heat and humidity.
• Do not damage connections through mechanical or thermal impact.
• Prior to installation inspect the interface for transport damages. Do
not install damaged interface.
Maintenance
With correct installation according to chapter
4
the interface requires no
maintenance.
Disposal
The interface's electronic components contain materials that are harmful
for the environment and are carriers of recyclable materials at the same
time. Therefore, the interface must be recycled after it has been taken out
of operation ultimately. Observe the environment protection guidelines of
your country.
6 Technical data
Mechanical data Additional information
Housing plastic top hat rail, EN 50022
Electrical data Additional information
Operating voltage 24 V DC ±20 %
Power input <1.3 W
Encoder supply ≤700 mA loadable