Siko IF09P/1, Перевод оригинальной инструкции по установке, Страница: 11 / 20

IF09P/1
Documentation English
IF09P/1 · Date 26.08.2019 · Art. No. 82491 · Mod. status 209/19
11
1 Documentation
The following documents describe this product:
• The data sheet describes the technical data, the dimensions, the pin
assignments, the accessories and the order key.
• The mounting instructions describe the mechanical and electrical
installation including all safety-relevant requirements and the associ-
ated technical specifications.
• The user manual for commissioning.
These documents can also be downloaded at "
http://www.siko-global.
com/p/if09p-1
".
2 Safety information
2.1 Intended use
The task of Profibus-Gateway IF09P/1 is the linkage of SIKO position
encoders with SIKONETZ3 or SIKONETZ4 protocol to a Profibus-DP. SIKO-
NETZ3 and SIKONETZ4 cannot share, however one common connection. The
two interface protocols, the PROFIBUS station address as well as various
diagnostic functions are selected by means of the keyboard of the IF09P/1.
1. Observe all safety instructions contained herein.
2. Read all documents provided on the CD.
3. Arbitrary modifications and changes to this interface are forbidden.
4. Observe the prescribed operating and installation conditions.
5. Operate the interface exclusively within the scope of technical data
and the specified limits (see chapter
6
).
2.2 Identification of dangers and notes
Safety notes consist of the signal symbol and a signal word.
Danger classes
Immediate danger that may cause irreversible bodily harm resulting in
death, property damage or unplanned device reactions if you disregard
the instructions given.
Danger that may cause serious bodily harm, property damage or
unplanned device reactions if you disregard the instructions given.
DANGER
WARNING