Siko AS510/1, Руководство по установке, Страница: 15 / 24

AS510/1
Installation English
AS510/1 · Date 23.05.2017 · Art. No. 82049 · Mod. status 304/16
15
e. g.
AS510/1
-
0023
variant number
type of unit
4 Installation
4.1 Mechanical mounting
Translation module failure
` When mounting pay attention to the IP type of protection (see chap-
ter
11
).
` Do not open the incremental encoder yourself.
` Avoid impact on the device.
` Do not modify the device in any way.
The unit has been designed for screw fixation - via the lateral mounting
tabs / bores (see
Fig. 1
).
1
Sensor
2
DIP-switch
3
LEDs
Fig. 1: Mounting / connections
2
3
1
4.2 Electrical installation
Destruction of parts of equipment and loss of regulation control
` All lines for connecting the translation module must be shielded.
` Never wire or disconnect electrical connections while they are live.
` Perform wiring work in the de-energized state only.
` Use strands with suitable ferrules.
` Check all lines and plug connections before switching on the device.
` Switch on operating voltage together with the downstream electronic
unit (e. g., control unit).
CAUTION
WARNING