Siko AG03/1, Перевод оригинальной инструкции по установке

Страница: 48 / 52

AG03/1
Accessory connector English
AG03/1 · Date 23.07.2019 · Art. No. 86426 · Mod. status 179/19
48
8
31
12
Fig. 14: Right angle mating connector M12
Changing the angle position ( Fig. 14 )
Multiple angle adjustments to a single direction cause shortening of the
line and break.
1. Turn on female contact, slightly pull out and rotate to desired angular
position (in steps of 45°).
2. Screw on female contact.
8.4 Straight matting connector M8
Advice
` Strand cross-section of lines min. 0,14 mm² - max. 0,5 mm² / cable
feed-through: ø3,5-ø5 mm.
• Accessory SIKO art. no."84209" (socket contact 4 pin Profibus In).
• Accessory SIKO art. no."84210" (plug pin 4 pin Profibus Out).
Mounting ( Fig. 15 )
1. Thread pressure nut onto the cable.
2. Strip the cable sheath, shorten the screen.
3. Bare cores.
4. Thread cores through the housing and connect.
5. Screw housing on pin body.
6. Tighten pressure nut.
NOTICE
NOTICE