Device description
VT...40
- 22 -
© SIKA
•
Ea6800_VT40
•
06/2019
1
Device description
The SIKA flow sensors of the series Turbotron VT...40 are transducers for flow rate and total
flow measurement.
It has an almost unlimited application through its exceptionally compact design, its very wide
measurement range and its convincing measurement accuracy.
Flow sensor components VT...40:
1.1
Intended use
The flow sensors of the series VT...40 may only be used for flow rate measurements or dos-
ing of liquids. Never use them for gas measurements.
WARNING! No safety component!
The flow sensors of the series VT...40 are no safety components in accordance with Di-
rective 2006/42/EC (Machine Directive).
Never use the VT...40 as a safety component.
The operational safety of the device supplied is only guaranteed by intended use. The speci-
fied limits (
§ 8 “Technical data”) may under no circumstances be exceeded.
Before ordering and installation, check that the material of the turbine flow monitor is suita-
ble to the medium to be measured and the application (
§ 8.3 “Materials in contact with flu-
id”).
1.2
Exclusion of liability
We accept no liability for any damage or malfunctions resulting from incorrect installation,
in-appropriate use of the device or failure to follow the instructions in this operating manual.
