SIKA TP 38 165, Руководство по эксплуатации

Страница: 23 / 43

6 Operation of the calibrator TP 38 … / TP 38 … E
Subject to technical changes 23 Ba_TP38-E_en 12/2014
SIKA Dr.Siebert & Kühn GmbH & Co.KG

Struthweg 7–9

D-34260 Kaufungen
 
+49 5605 803-0
 
+49 5605 803-54

info@sika.net

www.SIKA.net
6.5.1 Select RTD menu
This menu item is displayed if an internal measuring instrument is available and switched on.
After selecting the "calibr RTD" menu item in Select mode using the cursor key and confirming your selection
with the Select key, the "Select RTD" submenu will be displayed.
The settings for the connected resistance thermometer are made in this menu.

Make your selection using the cursor keys.

Activate your selection using the Select key.
If the check or calibration of an RTD resistance thermometer is enabled with "ON", operation will be initiated in
"calibr RTD” mode.
Fig. 10: Submenu „select RTD“
Switching ON/OFF
In the second line you can switch the resistance thermometer check on or off. In the third line you can select
the type of probe.
Probe Types

PT100 Pt 100 resistance thermometer in 2 or 3 or 4 wire connection

PT500 Pt 500 resistance thermometer in 2 or 3 or 4 wire connection

PT1000 Pt 1000 resistance thermometer in 2 or 3 or 4 wire connection
Connection
The "4 mm terminals"-connection does not include setting options since resistance thermometers can only be
connected to 4 mm terminals.