Commissioning
i
ndu
Q
®
- Series VMM
- 20 -
© SIKA
•
Ba_VMM_us
•
09/2018
Change the orientation of the display electronics (only compact version)
The display electronics of the compact version isn't
rigidly connected to the sensor but can be turned by
± 180°.
The display electronics has been factory-installed so
that in case of a horizontal piping and a flow direction
from left to right the set orientation is in the correct
position.
Follow the steps to change the orientation of the dis-
play electronics:
Loosen the two setscrews
.
Turn the display electronics in the desired posi-
tion.
Tighten the two setscrews
again.
