13
2.
Follow Microsoft installation procedure to install
Windows accordingly.
3.
Restart your system when prompted by Windows
installation.
4.
At the
Windows Setup
screen, press
F6
to install the
driver.
5.
Insert the driver
diskette. Press
S
then press
Enter
.
6.
Select
Silicon Image SiI 3x12 SATARaid Controller
for Windows XP/Server 2003/Vista
and press
Enter
.
7.
Press
Enter
to continue and follow on-screen
instructions to complete the installation.
When Windows installation completes, go to
SATARaid
GUI
on page 17 and install the RAID monitoring utility.
For An Existing Installation
1.
Install the board and boot up Windows.
2.
At the
Found New Hardware Wizard
.
XP (w/SP1 or earlier)/Server 2003
: continue to step #3.
XP (w/SP2 or later)/Server 2003 (w/ SP1 or later)
: select
No, not this time
, then click
Next
.
3.
Insert driver CD, select
Install the software
automatically (Recommended)
, then click
Next
.
Note:
Most systems will install the driver
automatically after inserting driver CD.
4.
Click
Next
, then click
Finish.
5.
Remove the driver
CD, shutdown Windows, and
setup your RAID array.
When Windows resumes, go to
SATARaid GUI
on page
17 and install the RAID monitoring utility.
Содержание Serial ATA PCI RAID
Страница 34: ...34 Blank Page ...
