11
For An Existing Installation
1.
Install the board and boot up to Windows.
2.
At the
Add New Hardware Wizard
, insert the driver
CD.
3.
Select
Automatic search for a better driver
(Recommended)
, then click
Next
.
4.
Accept the default entry then click
OK
.
5.
Click
Finish
.
6.
Remove the driver
CD, shutdown Windows, and
setup your RAID array.
When Windows resumes, go to
SATARaid GUI
on page
17 and install the RAID monitoring utility.
To Verify Windows 98SE/ME Installation
1.
Right click
My Computer
and click
Properties
.
Select
Device Manager
tab.
2.
Double click
SCSI controllers
,
Silicon Image Sil
3512 SATARaid Controller
should be displayed.
Windows 2000
A new installation of Windows 2000 requires a floppy
disk for the driver installation. To make this floppy disk,
copy the
contents
of the
Floppy
folder, found on the
driver CD, onto a blank floppy disk then follow the
directions below.
For A New Installation
1.
Setup the RAID array prior to Windows installation.
2.
Follow Microsoft Windows 2000 installation
procedure.
3.
Restart the computer when prompted by the
installation.
Содержание Serial ATA PCI RAID
Страница 34: ...34 Blank Page ...
