7
32-bit Windows Vista™
New 32-bit Windows Vista Installation
1.
Install the board and follow Microsoft procedures
to install Windows accordingly.
2.
At
Where do you want to install Windows?
,
click
Load Driver
.
3.
Insert driver CD, then click
Browse.
4.
Double click
CD Drive (D:).
(change D: to match
your CD-ROM drive letter).
5.
Highlight
Floppy
folder, then click
OK
.
6.
Select
Silicon Image SiI 3132...Controller
(
D:\Floppy\SI3132.inf
), then click
Next
.
7.
Follow on-screen instructions to complete Windows
Vista installation.
Existing 32-bit Windows Vista Installation
1.
Install the board and boot up Windows.
2.
At the
Found New Hardware Wizard
, insert the
driver CD, select
Locate and install driver software
(Recommended)
, then click
Continue
.
3.
Click
Next
, then
Close
.
4.
Remove the driver CD and restart Windows to
complete the installation.
64-bit Windows Vista
New 64-bit Windows Vista Installation
1.
Install the board and follow Microsoft procedures
to install Windows accordingly.
2.
At
Where do you want to install Windows?
,
click
Load Driver
.
3.
Insert driver CD, then click
Browse
.
