6
Existing 64-bit Windows XP/Server 2003 Installation
1.
Install the board and boot up Windows.
2.
At the
Found New Hardware Wizard
:
XP (w/SP1 or earlier)/Server 2003
: continue to step #3.
XP (w/SP2 or later)/Server 2003 (w/ SP1 or later)
: select
No, not this time
, then click
Next.
3.
Insert the driver CD, select
Install the software
automatically (Recommended)
, then click
Next
.
Note:
Most systems will install the driver
automatically after inserting driver CD.
4.
Click
Finish
, remove the driver CD and restart
Windows to complete the installation.
To Verify Windows 2000/XP/Server 2003 Installation
1.
Right click
My Computer
and click
Manage
.
2.
Select
Device Manager
.
3.
Double click
SCSI and RAID Controllers
, then
double click
Silicon Image SiI 3132... Controller
to
display driver properties.
4.
A message
This device is working properly
is displayed
in the dialog box, the driver has been correctly
installed.
