3
2.
Unplug the power cord and remove your computer's
cover.
3.
Remove the slot bracket from an available PCIe slot.
4.
Carefully align the card to the selected PCIe slot
push the board down firmly, but gently, until it is
well seated.
5.
Replace the slot bracket holding screw to secure the
card.
6.
Replace the computer cover and reconnect the power
cord.
Windows Driver Installation
This section provides information on how to install the
SATA II PCIe Pro
drivers.
Windows 2000
New Windows 2000 Installation
A new installation of Windows 2000 requires a floppy
disk for the driver installation. To make this floppy disk,
copy the
contents
of the
Floppy
folder, found on the
driver CD, onto a blank floppy disk then follow the
directions below.
1.
Install the board and follow Microsoft procedures
to install Windows 2000 accordingly.
2.
Restart your system when prompted during
Windows installation.
3.
At the
Windows 2000 Setup
screen, press
F6
to
install the driver.
4.
Insert the driver
diskette. Press
S
, then press
Enter
.
5.
Select
Silicon Image SiI 3132... Controller for
Windows 2000
and press
Enter
.
